• Dispense Valve for DuraPump; GP, A/B Viscosity ratio is > 6

  • Mã sản phẩm: 1079254
  • Phân loại sản phẩm:
    Nhà sản xuất:
  • Dispense Valve for DuraPump meter mix dispense systems. For use with non MMA chemistries when the ratio of Part A/B viscosity is 6 X or greater. This reliable and durable valve has shut-off pistons with Teflon® seals that allow for high flow with minimal maintenance. In addition, the seals can be adjusted without disassembly of the valve body.

    The pneumatic valve has shut-off pistons which ensure good control of dot or shot volume. After each shot, the dual pistons retract and snuff back material from the end of the mixing nozzle. This feature helps eliminate after drool. This valve can be used either as a stationary-mounted valve or mounted onto an optional Pistol Grip with Pneumatic Trigger (item # 1051661).

    Product Features:

    Aluminum valve with hard-coated and lubricated pistons.
    Easy to clean. If cross-contamination occurs, the manifold can be removed and cleaned without disassembly of the valve body
    Flush valve manifold allows for cleaning the mixing nozzle with air or solvent.
    Weight: 1.6 lbs.
    Pressure rating: 3,500 psi

  • Giá bán: Liên hệ
  • User Manual 2D AutoCAD Dwg 2D AutoCAD Dxf

Đánh giá của bạn: 
 
 
 
 
 
 0điểm /0lượt
Còn lại 0 chiếc

v

Dispense Valve for DuraPump meter mix dispense systems.  For use with non MMA chemistries when the ratio of Part A/B viscosity is 6 X or greater. This reliable and durable valve has shut-off pistons with Teflon® seals that allow for high flow with minimal maintenance. In addition, the seals can be adjusted without disassembly of the valve body.

The pneumatic valve has shut-off pistons which ensure good control of dot or shot volume. After each shot, the dual pistons retract and snuff back material from the end of the mixing nozzle. This feature helps eliminate after drool. This valve can be used either as a stationary-mounted valve or  mounted onto an optional Pistol Grip with Pneumatic Trigger (item # 1051661).

Product Features:

Aluminum valve with hard-coated and lubricated pistons.
Easy to clean.  If cross-contamination occurs, the manifold can be removed and cleaned without disassembly of the valve body
Flush valve manifold allows for cleaning the mixing nozzle with air or solvent.
Weight:  1.6 lbs.
Pressure rating: 3,500 psi

 
Mix Block Manifold Assembly for DuraPump Meter Mix Systems

Mix Block Manifold Assembly for DuraPump...

1167586

Giá bán: Liên hệ

Dispense Valve for DuraPump; MMA, A/B Viscosity ratio is > 6

Dispense Valve for DuraPump; MMA, A/B...

1079256

Giá bán: Liên hệ

Precision Hydraulic Flow Controller

Precision Hydraulic Flow Controller

1051695

Giá bán: Liên hệ

Hose for DuraPump; stainless steel; for MMA Chemistries; 3/8 inch x 144 inches long.

Hose for DuraPump; stainless steel; for...

1051694

Giá bán: Liên hệ

Hose for DuraPump; mild steel; for non-MMA Chemistries; 3/8 inch x 24 inches long.

Hose for DuraPump; mild steel; for...

1051692

Giá bán: Liên hệ

Hose for DuraPump; stainless steel; for MMA Chemistries; 3/8 inch x 24 inches long

Hose for DuraPump; stainless steel; for...

1051670

Giá bán: Liên hệ

 

Danh mục sản phẩm


Các hàng đã đặt

Hỗ trợ trực tuyến

Phòng Kỹ thuật
Phòng kinh doanh
Mr Quân - Linh kiện điện tử
+84963580011
Mr Hanh
Mr Tùng - Máy in, mực in
0964510031

Sản phẩm nổi bật

Thống kê truy cập

  •   Đang truy cập 4
 
  •   Hôm nay 399
  •   Tháng hiện tại 74,297
  •   Tổng lượt truy cập 3,930,858