• Dial-A-Seal® Applicator

  • Mã sản phẩm: 998400
  • Phân loại sản phẩm:
    Nhà sản xuất:
  • The 998400 Dial-A-Seal® Applicator is a touch-actuated, all pneumatic applicator for dispensing high viscosity Loctite product onto threaded pipe fittings and nipples. The system has a quick turn turret which is equipped with cavities for 1/16, 1/8, 1/4, 3/8, 1/2, 3/4 and 1 inch male pipe threads.

    To dispense, the operator presses a fitting down into the correct cavity. The downward motion of the turret depresses a switch that actuates the piston pump causing a metered amount of product to be dispensed. When the fitting is removed, the pump will reset for another cycle.

    The Dial-A-Seal accepts 50 ml, 250 ml or 1 liter wide mouth bottles. The product dispense quantity can be adjusted with the rear adjustment knob; the upper limit per dispense cycle is 0.7 ml. The suggested setting for each diameter fitting is given in a table on the units casing. This system includes a stand for holding 1 liter bottles and one empty 1 liter bottle. This unit is recommended for applying Pipe Sealant with Teflon (PST), Stainless Steel PST, Vibra-Seal, and Anti-Seize.

  • Giá bán: Liên hệ
  • Data Sheet  Product Manual Instruction for Spare parts kit

     2D Dwg File 2D Dxf File

    Spare Parts:

    Item Title
    980761 Air Cylinder Piston Assembly
    981606 Chamber
    981669 Seal
    998402 Spare Parts Kit for Dial-A-Seal
    998425 Turret

     

Đánh giá của bạn: 
 
 
 
 
 
 0điểm /0lượt
Còn lại 0 chiếc

The 998400 Dial-A-Seal® Applicator is a touch-actuated, all pneumatic applicator for dispensing high viscosity Loctite product onto threaded pipe fittings and nipples. The system has a quick turn turret which is equipped with cavities for 1/16, 1/8, 1/4, 3/8, 1/2, 3/4 and 1 inch male pipe threads.

To dispense, the operator presses a fitting down into the correct cavity. The downward motion of the turret depresses a switch that actuates the piston pump causing a metered amount of product to be dispensed. When the fitting is removed, the pump will reset for another cycle.

The Dial-A-Seal accepts 50 ml, 250 ml or 1 liter wide mouth bottles. The product dispense quantity can be adjusted with the rear adjustment knob; the upper limit per dispense cycle is 0.7 ml. The suggested setting for each diameter fitting is given in a table on the units casing. This system includes a stand for holding 1 liter bottles and one empty 1 liter bottle.  This unit is recommended for applying Pipe Sealant with Teflon (PST), Stainless Steel PST, Vibra-Seal, and Anti-Seize. 

Video

 
Pump-A-Bead® II 850 ml Dispense System

Pump-A-Bead® II 850 ml Dispense System

986000

Giá bán: Liên hệ

 

Danh mục sản phẩm


Các hàng đã đặt

Hỗ trợ trực tuyến

Phòng Kỹ thuật
Phòng kinh doanh
Mr Quân - Linh kiện điện tử
+84963580011
Mr Hanh
Mr Tùng - Máy in, mực in
0964510031

Sản phẩm nổi bật

Thống kê truy cập

  •   Đang truy cập 15
 
  •   Hôm nay 110
  •   Tháng hiện tại 24,097
  •   Tổng lượt truy cập 4,785,809