• Pump-A-Bead® II 850 ml Dispense System

  • Mã sản phẩm: 986000
  • Phân loại sản phẩm:
    Nhà sản xuất:
  • The 986000 Pump-A-Bead® II 850 ml Dispense System is an all-pneumatic dispense system for pumping Loctite® anaerobic gasketing materials from 850 ml cartridges. The product is mechanically dispensed using a ram. The ram is actuated by pneumatically driven reciprocating positive displacement piston pump. This provides for consistent dispensing and ensures that air is not introduced into the product.

    This system is well suited for stationary or bead dispensing. The Loctite® 986300 Poppet Valve is also included which is ideal for dispensing continuous beads at high pressures. The overall dimensions are 16.3 high by 36 wide by 10 deep. This system will develop fluid pressures up to 650 psi.

  • Giá bán: Liên hệ
  • Operating Manual DataSheet Product Manual

Đánh giá của bạn: 
 
 
 
 
 
 0điểm /0lượt
Còn lại 0 chiếc

The 986000 Pump-A-Bead® II 850 ml Dispense System is an all-pneumatic dispense system for pumping Loctite® anaerobic gasketing materials from 850 ml cartridges. The product is mechanically dispensed using a ram. The ram is actuated by pneumatically driven reciprocating positive displacement piston pump. This provides for consistent dispensing and ensures that air is not introduced into the product.

This system is well suited for stationary or bead dispensing. The Loctite® 986300 Poppet Valve is also included which is ideal for dispensing continuous beads at high pressures. The overall dimensions are 16.3 high by 36 wide by 10 deep. This system will develop fluid pressures up to 650 psi.

Video

 
Dial-A-Seal® Applicator

Dial-A-Seal® Applicator

998400

Giá bán: Liên hệ

 

Danh mục sản phẩm


Các hàng đã đặt

Hỗ trợ trực tuyến

Phòng Kỹ thuật
Phòng kinh doanh
Mr Long
+84979402637

Sản phẩm nổi bật

Thống kê truy cập

  •   Đang truy cập 26
 
  •   Hôm nay 1,180
  •   Tháng hiện tại 16,745
  •   Tổng lượt truy cập 723,524